| From Here
You Will Be Able To Read FAQ, Answers And Tips On Various Subjects
Return to General Info
F.A.Q.
Right Click On These Links And Select
"Open In New Window"
Simply
Closing The Window Will Return You Here
General
General Questions
Jim Shed's Glossary A-Z Everything You
Need To Know About Terms & Waterways
TIPS
Tips
Always Try To Remember To Change Chimney Exhausts Before Entering a
Tunnel....Cutter Akka Spreader Across The Top Of The
Exhaust
A small pipe with a vertical loop of brass, fitting above the
upright exhaust pipe of a motor boat to break the force of the
exhaust under bridges
and tunnels.
Bargee Bills Prop Cleaner
- Removes Plastic, Wire, Fabrics,
Rope and most other Rubbish and Debris from Props and Rudders.
Engine Repairs
Does your 1050 series Bolinder Smoke?
John Pattle
informs us that the injectors are fitted in the cylinder head in
copper sleeves. They should
not
be fitted with
copper sealing washers, they are
not required!
The effect of
the washer is to lift the nozzle into the cylinder head,
this causes the spray of fuel to not enter the combustion space
cleanly therefore not mixing/burning properly. This will
tend to cause diesel knock (similar to pinking in a petrol
engine). Over time this will
damage
your motor
waste fuel
and
cause
smoke.
|
